DownloadDiagnose and configure modules in your Ford Focus 2 or C-Max I with ease. Connecting via ELM327 or ELS27, access and manage various CAN-bus modules:
Engine Control Module (ECM):
Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145) engines.
Instrument Cluster (Dashboard):
Retrieve module information, read and clear DTCs, configure settings, reboot the module, and adjust or correct the odometer reading.*
Brake Control Module (BCM):
Access module information, read and clear DTCs, configure settings, reboot the module, reset the Dynamic Damper System (DDS) calibration, and perform brake bleeding.*
Body Control Module (BCM):
Access module information, read and clear DTCs, configure settings,* and reboot the module.
Central Gateway Module (CGM) / Restraint Control Module (RCM):
Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data.*
Transmission Control Module (TCM):
Access module information, read and clear DTCs, and reset the KAM.*
Climate Control Module (CCM):
Access module information, read and clear DTCs.
Audio Control Module (ACM):
Access module information, read and clear DTCs, and retrieve the radio code (for M-series).*
*Some features require the full version of the application.
For full application functionality and access to additional modules, a minor modification to your ELM327 adapter may be necessary. Instructions for this modification can be found here: Http://forffclub.narod.ru/index/0-2
ELS27 adapters can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use 2,000,000 using the ELS27 Baudrate utility.
